[vimeo https://vimeo.com/49657363] We sent Asher a 5’6 x 19 1/4 x 2 1/4 Racing Mullet dynocore with 25 litres for him to ride around Indo for the Waves board test. As you can see he its ripping on the thing in all conditions, from 2 foot sloppy ones to 5 foot reef wedges. Th Racing […]
This is the newest creation out of the factory for testing, a Modern-Vintage/Dynocore performance Simmons. Normally we keep the Dynocore technology for the performance shortboards as the flex and liveliness suits them better, and for the reto boards we stick with the traditional 6oz glass job to give them some weight and feel. However lately […]
Corktop™s in the wild….
So we are always open to trying new things at Diverse. You know that already.. a couple months ago we were approached by the distributors of Amorim Cork to try some of their composite Cork in our Laminating machine. Over the silly season we have been too busy to show you some of our progress. […]
Jasons feedback as a 3 times australian champion is very usefull in dialling in the performance of our Longboard project. Longboards have completely different flex requirements to performance short boards.
Over the course of our development of the Dynocore™ project the boards have been put through many stressfull situations. Initial variations showed some weakness that constant refinement and adaptations of materials overcame. Good reasons for application of fibres like Innegra™ and Carbon. Innegra™ has 3 times the elongation (ability to stretch) than […]
Styrene is composed of Benzene (liquid) and Ethylene (gas), both of which are petroleum products. EPS begins as a styrene monomer which goes through a process where the styrene monomers link into larger molecules called polystyrene. Expanded polystyrene or EPS foam is made from polystyrene pellets or beads that are puffed up with steam. The […]
Well Since this is the Dynocore™ source of information had better give you some… One of the things that i have learned over the years is the crazy amount of variables in Surfboards, From the shape right thru to the construction methods and materials. I see old school shapers who have perfected the art of […]